MAIntenAnce
MAIntenAnce
Motor
Excessive dust in the motor could cause excessive heat. Every effort should be made to prevent foreign material from entering the motor. A visual
inspection should be made at frequent intervals. Accumulations of dry dust can usually be blown out to prevent the interference with normal
motor ventilation. To remove dust, blow off motor with a low pressure air hose.
The operator performing this cleaning function should wear safety glasses and a filter mask. If any servicing (other than the above cleaning)
becomes necessary, it should be performed by an authorized service centre.
cAutIon:
WEARING A PARTICLE MASK/RESPIRATOR FOR PROTECTION AGAINST FINE DUST PARTICLES DURING CLEANING IS
HIGHLY RECOMMENDED.
Use the proper type of hose to connect the cyclone dust collector to the machine being operated. A dryer vent hose is not acceptable for this
purpose.
rePlAceMent druM bAgs And cAnIster FIlter bAg kIt
A 6pc. kit (model KDCB-85) including 5 drum bags and 1 canister filter bag is available for this Cyclone Dust Collector. Contact your distributor
of King Canada products for more information.
PArts dIAgrAM & PArts lIsts
Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.