Page 19
Unit will not lock on satellite,
or drifts off satellite,
Satellite signal is blocked from reaching unit. Move
vehicle to have unobstructed view of southern sky.
Software needs rebooting. Perform Option21 Reboot and
0-RECALIBRATION.
OPTION 21 REBOOT and 0-RECALIBRATE
1. Press MAIN 2 times to enter DEALER SETUP
menu.
2. Press “+” 13 times to scroll up to CODE 13.
3. Press ENTER.
4. Press 2 times to enter SET OPTION menu.
5. Press “
-
” 10 times to scroll down to OPTION 21.
6. Press ENTER to reinitialize software.
7. Wait unitl dispaly shows “Option 0” then press MAIN
to return to main page.
8. Press ENTER and “
-
” simultaneously to shut system
off.
9. Unplug data cable from controller for 10 seconds
and then plug back in.
10. Wait until controller shows “off” then press ON to
start system.
11. Press ON to enter IDLE/HOLD mode.
12. Press MAIN to enter USER SETUP menu.
13. Press to enter SET REGION menu.
14. Press “
-
” 5 times to scroll down to 0-RECALIBRATE.
15. Press ENTER. System returns to IDLE/HOLD mode
and is ready to run recalibration.
16. Press ON. System recalibrates gyros (may take up
to 10 minutes) and continues search in previously
set region.
Note: If OPTION 21 REBOOT and
0-RECALIBRATE do not
solve the problem, replace
the 35’ coax and repeat
procedure.
