background image

GENERAL SAFETY INSTRUCTIONS  

FOR POWER TOOLS

WARNING!

 Read all safety warnings and all instructions. Failure to follow the warnings 

and instructions may result in electric shock, fire and/or serious injury. Save all warnings 
and instructions for future reference. The term "power tool" in the warnings refers to your 
corded power tool. 
 

1) Work area safety

 

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. 
b) Do not operate power tools in explosive atmospheres, such as in the presence of     
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or 
fumes. 
c) Keep children and bystanders away while operating a power tool. Distractions can cause 
you to lose control. 

2) Electrical safety

 

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use 
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching 
outlets will reduce risk of electric shock. 
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges 
and refrigerators. There is an increased risk of electric shock if your body is earthed or 
grounded. 
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will 
increase the risk of electric shock. 
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power 
tool. Keep cord away from heat, oil, sharp edges or moving parts. 
Damaged or entangled cords increase the risk of electric shock. 
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. 
Use of a cord suitable for outdoor use reduces the risk of electric shock. 
f) If operating a power tool in a damp location is unavoidable, use a residual current device 
(RCD) protected supply. Use of an RCD reduces the risk of electric shock. 
NOTE: The term “residual current device (RCD)” may be replaced by the term “ground fault 
circuit interrupter (GFCI)” or “earth leakage circuit breaker (ELCB)”. 

3) Personal safety

 

a) Stay alert, watch what you are doing and use common sense when operating a power 
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or 
medication. A moment of inattention while operating power tools may result in serious     
personal injury. 
b) Use personal protective equipment. Always wear eye protection. Protective equipment 
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for    
appropriate conditions will reduce personal injuries. 
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting 
to power source, picking up or carrying the tool. 
Carrying power tools with your finger on the switch or energizing power tools that have the 
switch on invites accidents. 
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a 
key left attached to a rotating part of the power tool may result in personal injury. 
e) Do not overreach. Keep proper footing and balance at all times. This enables better   
control of the power tool in unexpected situations.

Содержание KC-1501LED








Отзывы: