ASSEMBLY
ATTACHING WORK LIGHT HEAD TO BASE
Place the base (A) Fig.4 on a flat surface. Position
the U-Shape bracket (B) of the work light head onto
the base (A) as shown in Fig.4. Use the lock knob
(C), flat washer and spring washer to secure the
work light head on the base.
OPERATION
ADJUSTING THE LIGHT DIRECTION
Your work light can be tilted vertically up to 30° down
or 90° up. To adjust the light direction, loosen the
side locking knobs (D) Fig.4. Adjust the work light
head to desired position, and retighten knobs.
ON/OFF SWITCH
Your work light is equipped with a weather protected
sealed ON/OFF switch (A) Fig.5 located on the back
side of the work light. Press the switch once to turn
the work light on and press the switch a second time
to turn it off. Always turn the work light off before
unplugging from power source.
MAINTENANCE & SERVICE
Your work light requires very little care and
maintenance. Simply clean the lens regularly with a
non-abrasive cleaner. Use similar care for the base
and U-bracket. When servicing, use only identical
parts. Use of any other parts may create a hazard
or cause product damage. Contact a King Canada service centre for identical
replacement parts.
WARNING:
Always make sure the work light is unplugged and completely cool before
attempting to clean it.
RECYCLING
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities. Contact you local government for information regarding the collection
systems available. If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging your
health and well-being.
ASSEMBLY, OPERATION
& MAINTENANCE
FIGURE 4
FIGURE 5
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts diagram
and parts list.
