background image

COPYRIGHT © 2008  ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.

VARIABLE SPEED ORBITAL

JIG SAW KIT

plus

plus

performance

performance

INSTRUCTION MANUAL

MODEL: 8329

with LED work light &

WARRANTY INFORMATION

2-YEAR 

LIMITED WARRANTY

FOR THIS JIG SAW  

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED WARRANTY

FOR NON-COMMERCIAL USE.

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

REPLACEMENT PARTS

Replacement parts for this product are available through our authorized King
Canada service centers across Canada.

LIMITED TOOL WARRANTY

King Canada makes every effort to ensure that this product meets high quality and
durability standards. King Canada warrants to the original retail consumer a 2-year
limited warranty as of the date the product was purchased at retail and that each
product is free from defects in materials. Warranty does not apply to defects due
directly or indirectly to misuse, abuse, normal wear and tear, negligence or
accidents, repairs done by an unauthorized service center, alterations and lack of
maintenance. King Canada shall in no event be liable for death, injuries to persons
or property or for incidental, special or consequential damages arising from the use
of our products. 

To take advantage of this limited warranty, return the product at your expense
together with your dated proof of purshase to an authorized King Canada service
center. Contact your retailer or visit our web site at www.kingcanada.com for an
updated listing of our authorized service centers. In cooperation with our authorized
serviced center, King Canada will either repair or replace the product if any part or
parts covered under this warranty which examination proves to be defective in
workmanship or material during the warranty period.

PARTS DIAGRAM & PARTS LISTS

Refer to the Parts section of the King Canada web site for the most updated parts
diagram and parts list.

KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4

www.kingcanada.com

 

Содержание 8329

Страница 1: ... defects due directly or indirectly to misuse abuse normal wear and tear negligence or accidents repairs done by an unauthorized service center alterations and lack of maintenance King Canada shall in no event be liable for death injuries to persons or property or for incidental special or consequential damages arising from the use of our products To take advantage of this limited warranty return ...

Страница 2: ...piece before operating 3 MAKE SURE THE BALDE IS SEATED PROPERLY BEFORE OPERATING 4 WAIT UNTIL THE BLADE REACHES ITS MAXIMUM SPEED BEFORE CUTTING 5 KEEP HANDS AWAY FROM MOVING PARTS We recommend you save these instructions GENERAL SPECIFIC SAFETY INSTRUCTIONS POWER SUPPLY WARNING YOUR JIG SAW MUST BE CONNECTED TO A 120V 15 AMP CIRCUIT FAILURE TO CONNECT IN THIS WAY CAN RESULT IN INJURY FROM SHOCK O...

Страница 3: ...ollet as far as it will go Make sure that the back edge of the blade sits against the roller guide D Release the lever A and pull on the blade until the blade holding collet snaps and secures the blade SELECTING THE CUTTING ACTION There are 4 cutting actions 3 orbital settings and 1 straight cutting setting To change the cutting action turn orbital settings lever A Fig 3 Settings 0 Straight line c...

Страница 4: ...ill be neccessary to replace the two AAA batteries located in the laser LED housing B Fig 8 If the batteries need to be replaced follow these instructions 1 Remove the laser LED housing B Fig 8 by pushing upwards on the housing 2 Remove used batteries A Fig 9 and replace with new AAA batteries 3 Reposition the laser LED housing B BEVEL CUTTING With the base A Fig 10 tilted you can make bevel cuts ...

Отзывы: