background image

31

SP

2. PRE-FILTER TREATMENT

Place the dosage housing in between the equipment's inlet 

tube. On this purpose:

• Disconnect the inlet tube of the system marked as 

“feed-entrada” and place the dosage housing between the 

water inlet and the inlet of the appliance (4). For an easier 

and more comfortable access during the sanitizing process 

and the opening and closing of the inlet valve, a manual 

valve in the closed position can be placed along with the 

sanitizing dosage housing. This valve will work as the man-

ual inlet valve of the system.

• Once the set has been installed, keep the new manual inlet 

valve closed and open the inlet valve that is connected to 

the wall adaptor (5).  The dosage housing must be empty.

• Pour 0.25 litres of hydrogen peroxide in the dosage hous-

ing placed at the appliance's inlet (6). Screw the housing 

properly in its head.

• The inlet manual valve and the tap must be closed. Plug 

the appliance to the power supply (if the model requires a 

power supply). 

• Open the inlet valve and let the appliance start working so it 

will absorb the hydrogen peroxide. Keep the inlet valve in this 

position and let the appliance work for 10 minutes.

• Close the inlet valve (7), open the water supply tap and let the 

tank empty (8). Wait until the appliance stops due to the lack of 

water and no more water is rejected into the drain.

• Empty the dosage housing. Before opening this housing, 

make sure you have a receptacle in place where you can empty 

it since it might be full of water.

3. TANK, POST-FILTER AND TAP TREATMENT

• Find the osmosis water production outlet of the membrane 

housing and follow the tube which comes out of it, which is 

connected to a T-connector (see   1   in sketch 9). Unplug this 

tube from the T-connector (see image 10 in next page).

CARBON 

CARBON 

INLET

SEDIMENTS

DRAIN

MEMBRANE

TAP 

OUTLET

PRODUCTION

    Dosage 

    housing

DRAIN

 Dosage 

housing

TAP 

OUTLET

TANK

POST-FILTER

1

1

CARBON

CARBON

POST-FILTER

PRODUCTION

INLET

SEDIMENTS

TANK

MEMBRANE

CLOSED

OPEN

4

ACQUA 

OSSIGENATA

6

CLOSED

7

OPEN

8

CLOSED

OPEN

OPEN

5

9

Содержание ERGO RO BLUE





































Отзывы: