Kinesis RISE 2020, Руководство пользователя

Страница: 6 / 20

STEP 4. BATTERY
Please read the enclosed Fazua manual on how to turn on and check the battery charge.
It may need charging before your first ride.
STEP 5. SUSPENSION FORK
Please refer to the enclosed X-Fusion manual for the correct set up of your fork.
STEP 6. FINAL CHECKS
Before riding you must read through the enclosed Fazua manual to familiarise yourself
with the operation and care of the Fazua system (Drivepack, Battery Pack, Remote and
Charger). You also check through your bike making sure each part is tightened to the
be done very carefully to ensure that the cable does not come detached or com-
pressed. If you are in any doubt of adjusting the seat post yourself, please ask your
local dealer to show you how to make this adjustment. If you choose to make your
own saddle height adjustment:
To adjust the seatpost height:
Loosen the seat post clamp using a 4mm hex key. Raise or lower the seatpost as re-
quired and at the same time feed the dropper post cable in or out of the head tube of
the frame to ensure that the dropper post cable is not stretched or compressed inside
the frame.
Re-tighten the seat post clamp to 5Nm and check the saddle height by sitting on the
bike. Repeat the above steps if necessary.
Once the saddle is at the correct height, make sure that the seat post does not project
from the frame beyond its “Minimum Insertion” mark on the seatpost. This line must
not be visible. If the RISE bike is ridden with the seat post extended beyond this mark,
catastrophic frame failure will occur.