12
No. Name
Description
1
CAT OUT
Connects to the CAT IN port of receiver by CAT cable. It
supports 12V PoC, the transmitter can be powered from
the receiver. The green LED illuminates when power is
applied. The LED illuminates orange when a HDMI signal is
transmitted.
2
IR IN
Connect IR receiver
3
IR OUT
Connect IR emitter
4
RS232
Connects to RS232 interface (e. g. media control system) to
pass-through commands
5
DISPLAY
Connect local HDMI device
6
SOURCE
Connect HDMI source device
7
EDID
3-pin DIP switch for EDID setting.
• MERGE: If there are two displays connected to HDMI-
CAT Extender Set 4K60, The EDIDs will be merged
to ensure that the video signal can be shown on both
displays.
• BYPASS: The source device gets the EDID from the
display connected to receiver’s HDMI output.
• COPY Tx: The source device gets the EDID from the
display connected to transmitter’s HDMI loop output
.
8
DC 12V
DC connector for power supply
4. Transmitter panel description
1
3
4
5
6
7
8
2
OUT
DISPLAY
SOURCE
COPY Tx
BYPASS
MERGE
EDID
DC 12V
IR IN
IR
OUT
Tx Rx
SIG
