Drill press head to column (Fig. 5)
CAUTION: The drill press head is heavy. To
avoid injury, two people should lift it into
position.
1.
Carefully lift the drill press head assembly (1)
and position it over the column (2).
2.
Place the mounting opening (3) on the drill
press head over the top of the column.
Ensure the drill press head is seated properly
on the column.
3.
Align the direction of the drill press head with
the direction of the base and the table.
4.
Tighten the set screw (4) using a hex key.
Feed handles (Fig. 6)
1.
Insert the three feed handles (1) into the
threaded openings on the feed hub (2).
2.
Manually tighten handles into openings.
Note: When using the bench drill press, one or
two of the feed handles may be removed if an
unusually-shaped workpiece interferes with
handle rotation.
Speed handle (Fig. 7)
1.
Insert the feed handle (1) into the threaded
opening on the speed hub (2).
2.
Manually tighten handle into opening.
VI. Assembly and adjustments ... continued
11
Fig. 6
Fig. 5
1
2
Fig. 7
1
2
1
4
2
3
