Kimoto Kimosetter 410 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 160

Kimoto Kimosetter 410 Скачать руководство пользователя страница 3

1

RADIO & TELEVISION INTERFERENCE

UNITED STATES. The equipment described in this guide generates and uses radio frequency
energy. If it is not installed and used in accordance with the instructions in this guide, it may
cause interference with radio and television reception.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

If necessary, you should consult your dealer or experienced radio/television technician for
additional suggestions. You may find helpful the following booklet, prepared by the Federal
Communications Commission:

How to Identify and Resolve Radio-TV Interference Problems.

This booklet is available from the United States Government Printing Office, Washington,
D.C. 20402. The booklet number is 004-000-00345-4.

Note:Changes or Modifications not expressly approved by the party responsible for compliance
could void the user’s right to operate this equipment.

Peripherals used in conjunction with this equipment must be connected via shielded interface
cables. Use of unshielded interface cables may result in interference to radio and TV reception,
and may void the user’s right to operate this equipment.

Declaration of Conformity

Model Number:

Kimosetter 410

Trade Name:

KIMOTO

Responsible party:

Kimoto Tech, Inc.

Address:

601 Canal St., Cedartown, Georgia 30125, USA

Telephone number:

(770) 748-2643

This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.

«
1
2
3
4
5
...
»

Содержание Kimosetter 410

































































































































































Отзывы:

Нет отзывов