Kimoto Kimosetter 410 Скачать руководство пользователя страница 156

Страница: 156 / 160

154

Chapter 5 - Troubleshooting

Windows:
Printer has the media miss feed.

Macinè'sh:
The Kimosetter 410 has a paper jam in the XXXXXXX.
Please correct this condition, or click Cancel to termi-
nate printing.

Check the following points.

Make sure that the media is not creased or wrinkled, and
that the proper type of media is in use.

Always use the Kimoplate e

media.

Check the inside of the sheet feeder.

Turn off the printer, and check the inside of the sheet feeder
for any foreign object.

Caution

Make sure to turn off the printer before reaching into the sheet
feeder. Failure to do so can cause mechanical trouble or injury.

Clean the transport rollers.

Clean the transport rollers by referring to “Cleaning the Trans-
port Rollers” in Chapter 4.

Windows:
This print job cannot be completed.
Because the printer has encountered an error of Ther-
mostat.

Macintosh:
The Kimosetter 410 has a thermostat controller error.
Please correct this condition, or click Cancel to termi-
nate printing.

Check the following points.

Turn off the printer, and open the front cover to let it cool
down.

Содержание Kimosetter 410

































































































































































Результаты поиска

Содержание Kimosetter 410

Отзывы:

Kimoto Kimosetter 410, Руководство пользователя, Страница: 156 / 160

Результаты поиска

Содержание Kimosetter 410

Отзывы: