Kimoto Kimosetter 410, Руководство пользователя, Страница: 131 / 160

129
for Windows and Macintosh
6. Turn the feed roller
Press the ready/insert button to turn the feed roller.
Wipe the feed roller (metal shaft roller) with tissue for except
bacterium and a cotton bud.
7. Close the front cover
Close the front cover after you’ve finished cleaning the feed
roller.
The printer will be ready for printing.
Cleaning the Transport Rollers
After frequent use, dust will accumulate on the transport rollers, which can result
in failure in feeding media into the printer. When you notice signs of trouble in the
media feed operation, clean the transport rollers by following the steps described
below, with tissue for except bacterium and a cotton bud.
Caution:
• Do not use benzene, thinner, or other volatile materials, as
they may damage the printer components.
• Do not get the inside of the printer wet.
1. Turn off the printer.
In preparation for cleaning the transport roller, turn off the printer
to initialize.
2. Remove media.
Remove all the media from the sheet feeder.
3. Initialize the printer.
Turn on the printer, and make sure the
power and ready lights
are lit.
4. Open the front cover.
Push the front cover release button and gently lower the front
cover while supporting it with a hand.
5. Set the printer to the cleaning mode.
Make sure the error light is blinking. Press and hold the ready/
insert button, and the carriage will move to the left.
Caution:
Never reach into the printer. Doing so can result in a trapped
hand as the carriage moves to the left, which can cause injury
and/or mechanical trouble.