Kimoto Kimosetter 410, Руководство пользователя, Страница: 130 / 160

128
Chapter 4 - Appendix
Cleaning the Feed Roller
Use ethyl alcohol and a cotton bud to clean the feed roller as described below.
Caution:
• Do not use benzene, thinner, or other volatile materials, as
they may damage the printer components.
• Do not get the inside of the printer wet.
1. Turn off the printer.
2. Initialize the printer.
The printer must be initialized for cleaning the feed roller.
Turn off the printer first, then press the Power button to turn on
the printer.
3. Open the front cover.
Push the front cover release button and gently lower the front
cover.
4. Secure the carriage.
Press the ready/insert button to move the carriage to the safety
position.
Caution:
Never reach into the printer. Doing so can result in a trapped
hand as the carriage moves to the left, which can cause injury
and/or mechanical trouble.
5. Clean the feed roller.
Wipe the feed roller (metal shaft roller) with a cotton bud dipped
in ethyl alcohol, then wipe with the dry cloth. The feed roller
may not come clean in one wipe, so repeat several times.
Caution:
• Avoid getting alcohol on the platen.
• Wait until the alcohol dries before printing.
Wipe the feed roller (metal
shaft roller) in contact with
the small rollers (indicated
in white in the figure).