Access
Air velocity
function by means of key. With
Air velocity
function, you can access to following sub-functions
-
Hold
-
Config.
(Configuration)
-
Params
(Parameters)
-
Avg.
(Average)
-
Rec
(Recording)
Veloci.
Hold - Min./Max.
Press 1x in order to select
HOLD
function : measurement holding on display.
Press 2x in order to select
Min-Max
function : display of minimum and maximum values.
Press 3x : back to the continuous measurement.
9
IV – Menus
This function allows to calculate an average value that the device measured in an interval chosen time.
Timer
is displayed. Select
Start
with access key for launching measurement.
If you click on
average icon
, max. and min. values, standard deviation, average of each channel and time chosen will be displayed.
•
Automatic average
Average
This function allows to calculate the average value of various points that you can select.
Numbers of selected points
and
parameter
for which calculation is carried out, are displayed
For adding a new measuring point to this calculation, press
OK
to confirm.
If you click on
average icon
, max. and min. values, standard deviation, average of each channel and e numbers of measuring points will be
displayed. If you want to see all values, select
Visu.
and scroll
with
and
.
•
Point / point average
Press
or
OK
to enter Average sub function. With
and
,
you can select :
point/point average, auto, point/point automatic
. Confirm
with
OK
or
.
To select the unit
press
OK
or
.
Select
mm
or
in
with arrow buttons
and
. Confirm with
OK
.
Press
or
OK
to enter into the
K2 factor
sub function. Select respectively
ON
or
OFF
with
and
in order to enable or disable this
function. Confirm with
OK
.
•
Units
•
K2 factor
Air velocity
AIR VELOCITY
Display
Rec.
Config
Params
Press
Airflow
Hold
Probe
Alarms
AutoZ
Avg.
The CO mode is available when a CO/Temperature probe is connected.
You can access this function selecting COmax with the access key
The CO is measured on an adjustable period, the maximum value measured in this period is called
CO max
. When CO peak is selected, the
period is diplayed (30 seconds by default). Press
Valid.
to launch the measurement. When the countdown is finished, the CO max is displayed.
To modify the period, press
Period
with the access key. Modify time with arrows keys
and
.
Confirm with
OK
or
.
COmax
CO max
actoolsupply.com
actoolsupply.com
Содержание MP 200 G
Страница 15: ...actoolsupply com actoolsupply com...
