10
IV – Menus
Configuration
Configuration sub-function allows to:
•
Select thermocouple type
Click on
OK
or
to enter into sub function : a list of thermocouple available ( K, J or T type) appears .
Select type with
and
. Confirm with
OK
.
•
Select display
Use the arrow key
or click on
OK
to enter into sub function. Select channel using
and
then confirm with
OK
. Use
or
to select
ON
(displayed) or
OFF
(not displayed) then confirm with
OK
.
•
Select units
Click on
OK
or
to enter into sub function : a list of units available appears. Select unit required with
and
. Confirm with
OK
.
Click on
Esc
to return to previous screen.
If you use thermocouple probes, you must enter type into the Configuration sub-function.
•
Select integration
The coefficient of integration allows to smooth the measure, to avoid variations. Click on
OK
or
to enter into sub function : a list of coefficient
(From 0 to 9) appears. Select coefficient required with
and
. Confirm with
OK
.
Coefficient 0: no integration, important fluctuation in the shown measure.
•
Select compensation
It is possible to modify the value of the compensation in temperature. Indeed, the velocity and the airflow with Pitot's tube and with Debimo
blades are calculated from a temperature of use in +20°C. It is thus necessary to enter the real temperature of use to obtain more precise
results.
Click on
OK
or
to enter into the sub function. or – signs with
and
with
and
then pass on the first digit with
. Enter
the first digit then move to the next one with
. Confirm with
OK
.
•
Select pressure system (only available for Air velocity and Airflow functions)
Click on
OK
or
to enter into sub function : a list of pressure systems available appears (Pitot tube L, S, Debimo or Other). Select your system
with
and
. Confirm with
OK
.
If
Other
is selected, you must enter a value. Click on
OK
or
to enter into sub function. With
and
, enter the first digit then move to the
next one with
. Confirm with
OK
.
•
Solenoid valve (available with the ± 500 Pa module)
Click on
OK
or
to enter into the sub function. Select respectively
ON
or
OFF
with
and
in order to enable or disable the solenoid
valve function. Confirm wih
OK
or
. When the solenoid valve is enabled, it runs every minute.
This function allows to calculate the average value of various points, calculated themselves on a duration beforehand defined.
You must enter duration : click on the
Period
icon. Select
minutes
or
seconds
with arrow buttons
and
.
Scroll digits with
and
. Confirm with
OK
. The numbers of points is displayed. Press
Ok
for launching measurement.
If you click on
average
icon, max. and min. values, standard deviation, average of each channel and numbers of measuring points will be
displayed.
You can view each measuring points if you click on
Visu.
•
Automatic point/point average
actoolsupply.com
actoolsupply.com
Содержание MP 200 G
Страница 15: ...actoolsupply com actoolsupply com...
