Assembly Instructions
Fluent
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2205361
Revision A-09
Page 1 of 1
P
ri
n
te
d
in
U
.S
.A
.
©
2
0
0
9
K
im
b
a
ll
In
te
rn
a
ti
o
n
a
l,
In
c
.
T
8
0
0
.4
8
2
.1
8
1
8
F
8
1
2
.4
8
2
.8
3
0
0
Set-on-Surface Bookcase
Tools Required
Package Contents
Installation
Note:
It is recommended that two (2) persons be used to lift
and place the set-on surface bookcase.
1. To securely attach a set-on-surface bookcase to a
worksurface, carefully turn the bookcase upside down on
a smooth, hard surface. Cut two strips of double-sided
adhesive tape to run approximately 2 inches from ends
and place them along the bottom panel as shown.
DO NOT
remove the film backer to expose the adhesive
at this time. (Figure A).
2. Carefully turn the bookcase upright and place it on the
worksurface in its desired position. Mark this location.
Note:
The worksurface
MUST
be clean, dry, and free of any
dirt or residue to assure adequate adhesion. Lift the bookcase
and remove the film backers from the double-sided adhesive
tape. Adhere the bookcase to the marked location on the
worksurface. (Figure B).
Caution:
The tape is a very strong adhesive and bonds
instantly to any surface it is applied to.
Figure A
Figure B
Mark desired
location
Peel off
film backer
Apply
double-sided
adhesive tape
(Bottom)
(Top)
Scissors
Pencil
Tape Measure
Double Sided
Adhesive Tape
2"
2"
