Copyright © Changsha KILOVIEW Electronics CO., LTD. All rights reserved
D300
·
User Manual
6
4
Installation and connection
4.1
Connect power and video signal
Use the standard power adaptor (DC12V/1A) connected to the device. The power light will be always
on after the device is powered on.
Connect the SDI or HDMI cable to the one end of the device (can be
connected at the same time, the device supports simultaneous output of two signals), and connect the
other end to a display device such as a monitor and an electronic screen.
.
.
Note: Please use the standard power adaptor provided. Using other unqualified power supplies
may damage the device.
4.2
Connect displayer
Connect the SDI or HDMI cable to corresponding interface of the device (it can be connected at the same
time, the decoder supports two signals output simultaneously), and the other end is connected to display,
such as monitor or electronic screen, etc.
Using SDI cable to connect SDI output interface with SDI display.
