Copyright © Changsha KILOVIEW Electronics CO., LTD. All rights reserved
D300
·
User Manual
3
2
Operation guidance
⚫
Installation and Connection of Device
Connect the power supply correctly and start the device. Connect the decoder HDMI/SDI interface to the
display.
⚫
Network Connection and Configuration
First, connect the decoder's
Ethernet
port 1 to the switch or PC by using the network cable. Then, set up
your PC’s IP address in the subnet of 192.168.1.0/24, and login the web page through
http://192.168.1.168 (the default IP address of the Ethernet port 1 is 192.168.1.168), and the default login
user name/password is admin/admin. After login, set parameters such as IP/DNS of the Ethernet port in
the "Network" menu.
⚫
Adding Video Sources
Login the web page, click Add on the "Media" menu, fill in the corresponding parameters
(RTSP/RTMP/HLS and other video sources) according to the video source information, and then confirm,
you can add a video source.
⚫
Decoding output
The decoder has two output windows, select any output window and click the HDMI/SDI option to be
green, which means that the window stream is output to the corresponding HDMI/SDI interface. Then
drag the added video source to the output window and the decoder will start decoding it. If the decoding
is normal, the video will be output.
