KiloVault KLV2V100024VRCK, Руководство по установке изделия

Страница: 8 / 13

Product Installation Manual
7
第十步 The Tenth step
如有线盒，参照接线图上的位置，根据接线盒安装示意图，把 ( 附 1/ 附 2) 接
线盒安装在侧面框架上的档条 A 及立柱上。
If there is a junction box, refer to the location on the wiring diagram. According
to the schematic diagram of junction box installation, install the junction box
（
1/2
Appendix
）
on the side frame on the Bar A and the upright post.
第十一步 The Eleventh step
电池组所有连接线及配件安装完毕后，使用万用表测量电池组电路是否
连通，电压是否正常，确认无误后正式接线通电使用，电池组安装完
毕。
After all the connecting wires and accessories of the battery pack are
installed, use a multimeter to measure whether the battery circuit is connected
and whether the voltage is normal? After confirming that there is no mistake,
the formal wiring shall be electrified for use. And the
installation of battery
pack is finished.
结束
End
电池
Battery
接线盒
Junction box