KPC 3k and 15k
MAN08152022
Unpacking and setup
•
Remove the scale from the box and place it on a firm, level surface.
•
Avoid locations with rapid temperature changes, excessive dust, moisture, air currents, vibrations,
electromagnetic fields, heat or direct sunlight.
•
Adjust the four levelling legs by turning them so that the air bubble is centered on the black circle of the
level bubble. All levelling legs should be touching the surface.
•
NOTE: Ensure that the scale is level each time its location is changed.
•
Before using the scale for the first time, the internal rechargeable battery should be fully charged for at
least 12 hours.
•
Connect the supplied AC adapter to the power input receptacle underneath the scale. Plug the AC adapter
into a power outlet and the battery will begin charging.
•
If the scale will be stored or transported in the future, save the packaging material to ensure the best
possible protection for the scale.
Weighing operation
s
KEYBOARD AND DISPLAY
Front Panel
KEY
DESCRIPTION
Press to turn on / off the scale.
The scale will first run a self-test and then enter into weighing mode.
MODE
Press to enter into the configuration setting menu.
When in weighing mode, use to change the weighing units.
→T←
Press to tare to deduct the container weight; net weight will display.
→0←
Press to zero the scale. Range of zero is ±2% FS of full scale.
