SAFETY INSTRUCTIONS
PLEASE NOTE FOLLOWING CONDITIONS BEFORE USING KILEWS KFA-0820
◎
For a normal performance, please install this machine on a flat and stable
working table, do not slant or pad, otherwise machine function might be
affected.
◎
Turn off the power switch and unplug the AC adaptor when this machine
is not being used for a period of time.
◎
To avoid damage and malfunction, use the AC adaptor supplied with this
machine only.
◎
Keep the surface of the rail groove clean and free from dust and oil.
Failure to keep the rail groove clean could result in damage to the
machine.
◎
The applied screws must be clean without grease or dust, and screw size
is within specified range as machine rail.
◎
Handle screws on rails with care, do not use excess force to remove them
or the rails may be damaged.
◎
When scooping chamber is turning, do not put fingers or objects other
than screws into the chamber.
◎
Do not turn ON the power switch before the rails are set properly for
operation.
◎
In case of malfunction during operation, please turn off the power and
unplug the AC adaptor. Contact your supplier at once.
Whenever this machine requires service, please contact your supplier for
assistance, or go to our website & e-mail us your contact detail and
requirement, we will respond ASAP.
