Kikusui PCR12000LE2, Руководство по установке

Страница: 8 / 14

8 PCR-LE2 series
Turning the POWER switch on
Turn the power on without the load connected.
If the POWER switch is turned on for the first time after purchasing the PCR-LE2 Series, the PCR-LE2 Series starts up using factory default set-
tings. For all other cases, the PCR-LE2 starts up using the settings that were in use the last time that the POWER switch was turned off.
You can set the output on/off state at power on. For details, see “User’s Manual -Basic-“ on the accompanying CD-ROM.
If “ALARM” or an error number is displayed, see “Alarms and Trouble” on the accompanying CD-ROM.
„ „
Turning on the POWER switch on the PCR6000LE2
or PCR9000LE2.
POWER
10A MAX 10A MAX
CIRCUIT
BREAKER
CIRCUIT
BREAKER
OUTPUT
DO NOT USE
OVER AC250V
POWER switch
1
Check that nothing is connected to the OUTPUT ter-
minal block on the rear panel and the outlets on the
front panel.
2
Check that the power cord is connected correctly.
3
Flip the POWER switch to the ( | ) side to turn the
PCR-LE2 Series on.
The firmware version is displayed for a few seconds. If no
errors are detected, the home position (the basic screen)
appears.
0.00
A
0.0
V
pk rms
AC LOAD
99.00
Hz
RANGE
L
RESP.M
OUTPUT
OFF
„ „
Turning on the POWER switch on the
PCR12000LE2, PCR18000LE2, or 27000LE2
The PCR-LE2 series has a MASTER POWER switch and SLAVE
POWER switches. You can turn off a SLAVE POWER switch to dis-
connect the product from the AC power line in an emergency. Nor-
mally, leave the SLAVE POWER switches turned on at all times, and
use the MASTER POWER switch to turn on the product.
MASTER POWER
SLAVE POWER SLAVE POWER
AC1-150V/AC2-300V MAX27kVA
DC1.4-212V/DC2.8-424V MAX18.9kVA
DC ・ 1-999.9Hz
AC POWER SUPPLY
PCR27000LE
2
MASTER POWER
switch
SLAVE POWER
switch
SLAVE POWER
switch
1
Check that nothing is connected to the OUTPUT ter-
minal block on the rear panel and the outlets on the
front panel.
2
Check that the power cord is connected correctly.
3
Check that the two SLAVE POWER switches are
flipped to the ( | ) side.
If not, flip them to the ( | ) side.
4
Flip the MASTER POWER switch to the ( | ) side to
turn the PCR-LE2 Series on.
The firmware version is displayed for a few seconds. If no
errors are detected, the home position (the basic screen)
appears.
0.00
A
0.0
V
pk rms
AC LOAD
99.00 Hz
RANGE
L
RESP.M
OUTPUT
OFF
Turning the Power On