Kikusui PAV10-20, Руководство пользователя

Страница: 11 / 46

PAV LAN
11
LAN Connection
Starting a connection
A PAV with LAN automatically determines whether a network connection is available. Then, it
automatically detects a network server and receives an IP address assignment or assigns an
IP address to itself. Further, it sends its IP address and host name to other devices in the net-
work.
1
Turn the POWER switch on.
The front panel voltmeter displays “
LAn
” for about 2 seconds. Then, the PAV pro-
ceeds as follows.
In safe start mode, “
OFF
” is displayed.
In auto start mode, the output is in the state that it was in immediately before the AC
input was turned off.
 In a typical network (network server) connection
When the PAV rear panel LAN status indicator LED lights green about 10 seconds
later, the connection is complete.
 In a P2P (peer-to-peer) network
When the PAV rear panel LAN status indicator LED lights green about 30 to 40 sec-
onds later, the connection is complete.
When the PAV obtains an IP address, the LAN status indicator LED lights green.
You can check the IP address on the front panel.
If the LAN status indicator LED does not light green, see “Troubleshooting”
(p.35) .
Displaying and changing the IP address
.
Displaying the IP address
To display the IP address on the front panel. follow the procedure below.
1
Press REM.
2
Turn the VOLTAGE knob until the voltmeter shows “
IP
.”
3
Press the VOLTAGE knob.
4
Turn the VOLTAGE knob.
The voltmeter shows “
IP1
” to “
IP4
,” and the ammeter displays the corresponding IP
address.
You can connect the LAN cable regardless of whether the PAV is turned on or off.