Kikusui PAV10-20, Руководство пользователя

Страница: 10 / 46

10
PAV LAN
LAN configuration 2. Network Connection
Control functions that can be used simultaneously with LAN
On a PAV with LAN, you can use local mode and external control simultaneously with LAN.
However, LAN cannot be used simultaneously with serial communication (USB/RS232/
RS485) remote mode. For the serial communication setup procedure, see the USB/RS232/
RS485 communication interface manual.
Local mode (front panel setup)
Even when connected to LAN, the PAV can be configured using the front panel knobs and
keys.
 Switching to local mode
When the PAV is in LAN remote mode, the front panel REM LED is lit. Press REM to turn off
the REM LED and switch to local mode.
If the PAV does not switch to local mode even when you press REM, perform one of the fol-
lowing procedures.
External control
Even when connected to LAN, you can control and monitor the PAV series using external
analog signals through the PAV’s J1 and J3 connectors.
Procedure (switching to local mode) Description
• Stop sending commands.
Press REM.
If the PAV continuously receives configura-
tion change commands through LAN, the
PAV switches to remote mode each time it
receives a command.
• SYSTem:REMote[:STAte] LOC/0
Send this command.
The PAV may be set to local lockout mode
through LAN.
• Turn the POWER switch off and then back
on.
Press REM.