Kikusui OT01-PCR12000LA/2, Руководство по эксплуатации

Страница: 13 / 96

OT01-PCR-LA/2 General 1-3
1.2 Features
■
Single-phase/single-phase, three-wire switching system
Single-phase/single-phase, three-wire switching can be achieved without mod-
ifying cable connections. The Output Terminal has dedicated output terminals
for single-phase and single-phase, three-wire, respectively, which is conve-
nient for connecting and disconnecting a load.
■
Single-phase parallel operation
Control
A system of AC power supplies capable of generating high-quality, large-
capacity output can be realized. The two PCR-LA power supplies are operated
in parallel, one slave unit of which is controlled by the master unit.
■
Single-phase, three-wire operation
Control
For single-phase, three-wire outputs, two AC power supplies are assigned to
the U- and V-phases, respectively. The U-phase unit controls the V-phase unit.
Phase voltage unbalance
Generally, all phase voltages are set in one operation, but it is also possible to
set phase voltages on a phase basis.
Line voltage measurements
The system is capable of measuring not only phase voltages but also line volt-
ages.
Single-phase, three-wire power
The power and apparent power of a load can be displayed as the total value of
those measured by the two PCR-LA power supplies. The total power factor for
the single-phase three-wire is also calculated from the total of measured val-
ues. (Note that the measurement of apparent power or the power factor
requires the RS-232C Control, the optional RC04-PCR-LA, or the optional
IB03-PCR-LA.)
RC04-PCR-LA: Remote Controller
IB03-PCR-LA: GPIB Interface