A
Page 24 / 24
Product Description
RBW322-FTL
Datasheet 1.10-60.015-01-EN
Issue 2016-05-16 ab V2.60
Plant
Further information on using the EnOcean wireless standard EEP D2-10-01
Custom Warnings
The RBW322-FTL does not display sent warnings via the bits “Custom Warning 1” and “Custom
Warning 2”.
Window Open Detection
The RBW322-FTL does not have an open window detection function. It only uses the information
from the radio messages from taught-in actuators or from a connected gateway.
Means that rapid temperature drop was triggered, e. g. by opening a window.
Room Control Mode
The RBW322-FTL supports the “Comfort”, “Economy” and “Building Protection” control modes.
“Pre-Comfort” is not assigned to an assignment program.
Menu locks and Display Switch-Off
Menu lock and display switch-off commands are overridden if the radio connection to the gateway is
interrupted.
Switching Between Daylight Savings/Standard Time
The RBW322-FTL automatically switches between daylight savings and standard time. It follows the
calendar for central Europe.
This function can be activated or deactivated via the “Daylight Savings Time Flag” bit.
When activating/deactivating this function, the RBW322-FTL does not automatically detect whether
the time should be adjusted straight away or not. The time should be synchronized immediately after
making this kind of changes.
Date and Time Setting
If the defined validity ranges are exceeded, the dates and times transmitted by the gateway are
rounded up or down to the valid ranges.
The year can be set to a minimum of 2014.
Weekly Schedule Transmission and Setting:
The weekly schedule is transmitted via utilization time blocks (connected time period assigned with
usage status or comfort mode) that are characterized by their start and stop time.
The RBW322-FTL processes and saves the weekly schedule in 15 minute blocks. The utilization time
periods should also be transmitted in whole quarters of an hour to prevent deviations between the set
and copied weekly schedule.
A maximum of four utilization time blocks are permitted per weekday or weekday range. If more utili-
zation time blocks are transmitted, the RBW322-FTL uses the first four of each and discards the rest.
An increased radio load may occur due to the possible connection of weekly schedule messages
(several telegrams that belong together). Unnecessary weekly schedule transmissions should,
therefore, be avoided.
