background image

MD15-HE, MD15-R-HE

Product Description

Q

Page 3 / 14

3.09-20.125-01-EN | 2019-08-19

MD15-HE and MD15-R-HE small actuators

Technical Data

Accessories (not included in delivery)

MD15-HE

Small actuator for Rxx and RWxx valves and 
other valves with an M30x1.5 connection that 
were manufactured by Heimeier, Honey-
well-MNG, Junkers, Honeywell-Baukmann, 
Oventrop (2001 and later) or Cazzaniga

MD15-R-HE Same as MD15-HE, but with positioning feed-

back

Nominal voltage

AC 24 V ± 10%; 50/60 Hz; 2.5 VA; DC 24 V ± 10%

Power consumption

Dimensioning: 3.7 VA (AC 24 V); 1.7 W (DC 24 V)
Nominal:  2.5 VA (AC 24 V); 1.3 W (DC 24 V)

Switch-on current

Max. 10 A for a short time

Control

Or continuous control DC 0(2)..10 V; < 0.5 mA, invertible

Connection

Built-in cable
MD15-HE:      1.5 m; 3 x 0.5 mm

2

MD15-R-HE:  1.5 m; 5 x 0.5 mm

2

Motor switch-off

Actuator spindle: when extending = load-dependent, when retracting = 
path-dependent

Display

LED display for operating voltage

Actuating noise

< 28 dB (A)

Positioning stroke

3 mm

Positioning time

22 s/mm

Positioning force

100 N (nominal)

Position indicator

Stroke range scale

Position feedback

Only with MD15-R-HE  DC 0..10 V, 5 mA for 0..100% nominal stroke

Manual adjustment

Only when disconnected from the power supply
Socket for hexagon key under the rubber pad on the actuator cover, 4 mm 
key socket

Valve exercise

Can be switched on

Ambient temperature

0..50 °C

Degree of protection

IP54, only when installed in appropriate position (see p. 9)

Ambient humidity

During operation: 0..85% r.h., non-condensing
Out of operation: 0..85% r.h., non-condensing

Overvoltage category III
Level of contamination 2
Protection class

III in accordance with EN 60730

Installation position

360°

Maintenance

Maintenance-free

Weight

250 g

VS3

Anti-vandalism protector for MD15-xx-HE

Содержание MD15-HE















Отзывы: