Product Description
MD15-HE, MD15-R-HE
Q
Page 10 / 14
3.09-20.125-01-EN | 2019-08-19
►
Place the actuator on the threaded connection of the valve and tighten hand-tight using the union
nut.
►
Establish the electrical connection.
►
After the line power has been switched on, an automatic initialization run takes place. The
actuator first travels to the upper end position and then to the lower end position.
The actuator will not respond to the control signal until the initialization run is complete.
%
%
9
9
11
12
