Page 14 / 16
Product Description
MD15/230-HR, MD15/230-HE, MD15/230-DA
3.09-20.250-01-EN | 2018-08-06
Q
Manual adjustment
!
CAUTION
Manual adjustment may only be performed when the actuator is installed.
■
The small actuator must be disconnected from the mains power supply
for manual operation.
■
Using a hexagon key (key socket 4 mm), the actuator can be moved
into any position.
!
CAUTION
If you manually adjust until the slip clutch responds, turn the hexagon key half a turn in the opposite
direction after the manually set stroke position has been reached.
NOTE
An initialization run must be performed after a manual adjustment, see Reinitialization section on p.14
