manualshive.com logo in svg

Kids UP KIDS ROCK 3, Руководство пользователя

Поделиться
Скачать
Kids UP KIDS ROCK 3 Скачать руководство пользователя страница 8

8  

 

“Movement is life!” 

 

III. READ BEFORE USING 

 

A. 

READ MANUAL CAREFULLY & OFTEN

 

Read manual completely before use!

 

Familiarize yourself with handling and functions of the product before use and practice them. You must 
read and fully understand the contents of this manual. Any caregiver that is going to operate this chair 
should also read the manual in full.   
 
You are responsible for the safety of your child. The safety of your child could be affected if you do not 
follow the instructions in this manual. Nevertheless, not all possible circumstances and unpredictable situa-
tions can be covered by this manual. Reason, care, and circumspection are not features of the product, they 
are required of persons who use the product. If instructions are not clear and further explanation is neces-
sary, please contact your Kids Up dealer. If you do not follow all instructions and warnings, damage to the 
chair or serious injury may occur. 

 

B.  DEFINITION OF SYMBOLS 

WARNING! 

The word “WARNING” and/or the symbol shown to the left indicate practices that are 
unsafe or dangerous and could result in serious injury or death to the occupant of this 
chair or others. 
 

WARNING! READ INSTRUCTION MANUAL! 
 
 
 
 

Additional symbols are defined throughout this manual along with operating instructions.

 

 

C.  CHOOSE THE RIGHT CHAIR & SAFETY OPTIONS 

There are several options available to meet the needs of children. Make sure that your (and your health care 
provider’s) choice of chair and other options takes into account your child’s comfort, positioning,  physical 
limitations, and hazards that may be encountered during daily use. Operating the pushchair outside of the 
recommendations provided by the manufacturer can lead to a dangerous situation. The pushchair is not 
suitable for jogging, running, skating or similar activities. Swiveling front wheels tend to wobble at higher 
speed and can cause a sudden stop and tip over of the pushchair. Use the pushchair only at regular walking 
speed. Under no circumstance should you let go of the handlebar while pushing. Do not ever push the chair 
away. 

 

Содержание KIDS ROCK 3





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды