21
“Movement is life!”
Figure 24: Active Mode
ACTIVE ON
TWIST HANDLE TO UNLOCK
Figure 26: Enabling the ACTIVE Motion
G. ENABLING THE ROCK ACTIVE MOTION
1. Pre-motion safety checklist:
YOU MUST VERIFY THE FOLLOWING PRIOR TO ENABLING
THE ROCK ACTIVE MOTION:
Hip Angle Adjustment pins fully engaged
Tilt-in-space mechanism fully engaged
Anti-tips correctly positioned
Rear wheels in stable position
Wheel locks engaged
Chair on flat surface
Clear area around chair and child
NEVER LEAVE CHILD UNATTENDED
2. If leg motion is desired, slide the triangular plate (near the child’s knees)
toward the front of the chair to depress the button on the black pivot. Lock
the triangular plate by pressing down on the top
(Fig. 25)
.
3.
Rotate the ACTIVE handle into the ON position. The child may start
moving at this point.
4. ADJUSTMENT OF THE HIP ANGLE OR TILT IS NOT
RECOMMENDED WHEN THE ACTIVE is enabled.
5.
To turn off the ACTIVE:
a. Use the handlebar to hold the chair in the down position while
disengaging the ACTIVE handle to lock the active.
b. Press forward slightly on the handlebar to lock completely.
c. If foot bed motion was enabled, disable it by lifting the triangular plate,
then sliding it toward the rear of the chair.
Figure 25: Turning on the Active
Leg Rest
1
2
3
WARNING: [Active Leg Rest] Make sure the child’s
fingers are away from the triangular plate at the
knee (Fig. 25) before moving it between positions be-
cause there is a risk that the child’s fingers may be
pinched.
