![background image](http://html1.mh-extra.com/html/kidde/trusense-smoke-3050-vas10/trusense-smoke-3050-vas10_user-manual_1965361006.webp)
6
If you require further information please contact Product Support at 1-800-880-6788 or write us at:
Kidde, 1016 Corporate Park Drive, Mebane, NC 27302. Our internet address is www.kidde.com.
3. Other Alarm Visual And Audible Indicators
Operational Mode
Visual Indications
Audible Indications
Action/Note
Normal (standby)
AC power:
Green LED on
continuously.
DC power:
Green LED blink
approx every 60 sec.
Test (button press
when no alarm con-
dition is present)
(Note: Test is very
loud, stand a few feet
away.)
Red LED blinks in time with
alarm pattern.
• Single beep.
• 3 long beeps, voice "Fire!", 3
long beeps.
Perform button press once a
week to verify proper alarm
operation.
Smoke Alarm
Memory (unit has
experienced a smoke
alarm event.)
Red LED blink every 16 sec.
After button push, voice “Smoke
previously detected.”
* NOTE: On DC power, alarm
memory is only retained for
24 hrs.
Push button to clear Alarm
Memory.
Smoke Alarm Hush®
Mode (SMART Hush®
CONTROL)
Red LED blinks every 2 sec.
After button push, voice “Hush
Mode Activated." Smoke alarm
pattern stops. (If there is too
much smoke to allow Hush® :
voice "Too Much Smoke, Can-
not be Hushed”, Smoke alarm
pattern continues.)
This feature is to be used
only when a known alarm
condition, such as smoke
from cooking, activates the
alarm.
Initiating Alarm
(multiple alarms in
an interconnected
system)
Red LED blinks in time with
alarm pattern indicating that
this is the unit initiating the
alarm in an interconnected,
multiple alarm, system.
NOTE: It is possible for more
than one unit to detect
a hazard and become an
initiating alarm unit (Red
LED blinking).
Unit in smoke alarm mode.