Smoke Sensing Chamber Operation
This alarm will “chirp” if it detects a problem with the
smoke sensing chamber. This chirp will occur approximately
20 seconds after the flash of the red LED indicator light.
Use only the following 9 V batteries for replacement:
Carbon-Zinc Type
Eveready 1222
Gold Peak 1604S
Alkaline Type
Energizer 522
Duracell MN1604 or MX1604
Gold Peak 1604A
Panasonic 6AM6, 6AM-6, 6AM-6PI,
6AM6X or 6LR61(GA)
Lithium Type
Ultralife U9VL-J
These batteries can be purchased at your local retailer.
WARNING! Use only the batteries specified above. Use of different batteries
than the recommended ones, may have a detrimental effect on the smoke
alarm. A good safety measure is to replace the battery at least once a year,
or at the same time you change your clocks for daylight saving time. Be
sure to follow the battery installation instructions printed on the back of the
alarm.
NOTE: REGULAR WEEKLY TESTING IS REQUIRED!
Maintenance
12
Содержание p9040CA
Страница 20: ...Notes...