October 2014
iv
06-236115-001
SAFETY BULLETIN 2; MAY 1, 1993
SUBJECT: SAFE CYLINDER HANDLING PROCEDURES
FOR PRESSURIZED CYLINDERS
BEFORE handling Kidde system products, all personnel must be thoroughly trained in the safe handling of
the containers as well as in the proper procedures for installation, removal, filling, and connection of other
critical devices, such as flexible hoses, control heads, and safety caps.
READ, UNDERSTAND and ALWAYS FOLLOW the operation and maintenance manuals, owner’s
manuals, service manuals, and other information that is provided with the individual systems.
THESE INSTRUCTIONS MUST BE FOLLOWED IN THE EXACT SEQUENCE AS WRITTEN TO PREVENT SERIOUS
INJURY, DEATH OR PROPERTY DAMAGE.
SAFETY CAP
•
Each
HFC-227ea
cylinder is factory equipped with a safety cap installed on the valve outlet, and
securely chained to the valve to prevent loss. This device is a safety feature, and will provide
controlled safe discharge when installed if the cylinder is actuated accidentally.
•
The safety cap must be installed in the valve outlet AT ALL TIMES except when the cylinders are
connected into the system piping or being filled.
•
The safety cap is intentionally chained to the cylinder valve to prevent loss while in service and must
not be removed from its chain.
PROTECTION CAP
A protection cap is factory installed on the actuation port and securely chained to the valve to prevent loss.
The cap is attached to the actuation port to prevent tampering or depression of the actuating pin. No
attachments (control head, pressure control head) are to be connected to the actuation port during
shipment, storage, or handling.
INSTALLATION
THIS SEQUENCE FOR CYLINDER INSTALLATION MUST BE FOLLOWED AT ALL TIMES:
1.
Install cylinder into bracketing
.
2.
Remove safety cap and connect all cylinder valves into system piping using flex hose or valve outlet
adapter.
3.
Remove protection cap and attach control heads, pressure control heads, pilot loops, etc., as
required.
WARNING
Pressurized (charged) cylinders are extremely hazardous and if not handled properly are
capable of violent discharge. This will result in serious bodily injury, death and property
damage.
WARNING
Discharge hoses or valve outlet adapter must be connected into system piping before
attaching to cylinder valve outlet to prevent injury in the event of discharge.
WARNING
Control heads must be in the set position before attaching to the cylinder valve actuation
port, in order to prevent accidental discharge.
Содержание ECS
