Kid Trax Toys Doc McStuffins, Руководство пользователя

Страница: 11 / 24

11
ATTACH THE AMBULANCE LIGHTS
❶ Align the tabs on the bottom of the rear assembly with the
slots in the rear of the vehicle. Figure 3.6
❷ Press down on the rear assembly until it snaps into place.
❸ Insert the screws into the three hole locations on the rear
assembly and tighten the screws.
❹ Fit the ambulance light over the top bar of the rear
assembly. The face of the ambulance light should face
toward the front of the vehicle. Figure 3.7
❺ Align the pins of the ambulance light bracket with the holes
on the ambulance light assembly.
❻ Insert the screws into the holes of the ambulance light
bracket, and tighten the screws.
4 screws needed
for this step
3 screws
needed for
this step
5
6
1
3
2
3
3
Figure 3.6 Figure 3.7
4