6-3 Display Overview:
2
3
1
v
BATT
1
234
v
OUTPUT
~
100%
Display Notes:
Press ‘’ESC’’ to select the indication of the Icon 3 (Output voltage, current,
power,
frequency)
Press “Up” to select or set auto switch the data of Icon 3.
Press and hold "UP" and "DOWN" button 3 seconds at the same time until the display backlight
flashes 3 times and the data parameters are restored to the factory default values;
When no fault , the LCD screen backlight automatically turns off when the button is not operated for
30s. When there is a fault or the buttons are pressed, the LCD screen automatically lights up.
No.
Icon
1
3
4
5
6
2
3
1
v
BATT
2
1
v
234
OUTPUT
~
100%
Function description
Battery Output Voltage
Indicates output voltage,
current,
power, frequency
Battery Level
DC/AC inverter is in operating mode
Indicates the percentage of load level
Warning And Fault codes
When the Inverter is running normal, the icon will rotate
clockwise. When the inverter detects a fault, the
corresponding fault code will appear.
6. OPERATION
6-1 Operation - General
Once your inverter is installed and connected to batteries, switch the inverter on using the main
power switch. Your inverter will now be ready to use, simply plug in an appliance and operate. The
digital LCD control can be used as detailed below.
Warning: Do not intentionally use an appliance that is above the inverters maximum output
rating. This will cause the inverter to shut down and in some cases may damage the inverter.
This inverter features a digital LCD display which can be used to view status information and
control certain parameters as outlined below.
1. SET/OK: Setting button, enter button
2. UP: Setting button (UP)
3. DOWN: Setting button (DOWN)
4. MENU/ESC: Menu button, exit button
5. ON/OFF: Power on/off switch
6-2 LCD Display and Controls: