![background image](http://html1.mh-extra.com/html/lvs/ceps-a/ceps-a_installation-instructions-and-user-manual_1953035001.webp)
LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216
Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707
www.lvscontrols.com
Model CEPS-A
Installation Instructions
& User Manual
500W-6000W
Emergency
Lighting Inverter
UL
®
UL924 LISTED
EMERGENCY LIGHTING
EQUIPMENT
73PK
IMPORTANT SAFEGUARDS:
When using electrical equipment, basic safety precautions
should always be followed, including the following:
1. Do not install outdoors.
2. Do not install near gas or electric heaters.
3. Mount CEPS-A securely and in locations and at heights where it will not be readily subjected
to tampering by unauthorized personnel.
4. Do not use this equipment for other than its intended use.
5. All installation and servicing of this equpiment must be performed by qualified personnel.
6. The use of accessory equipment not specified or recommended by LVS, Inc. may cause
unsafe conditions and may void the warranty.
7. Use caution when servicing batteries. Battery acid can cause burns to skin and eyes. If acid is
spilled on skin or in the eyes, flush with fresh water and seek medical attention immediately.
8. Make sure all connections are in accordance with NEC and local regulations.
9. Check AC Voltage rating on equipment label. Do not connect to any other voltage.
10. An unswitched AC power source is required (120 VAC or 277 VAC).
11. Do not use this product for other than intended use.
12. To reduce risk of electric shock, disconnect dedicated input breaker and all fuses before servicing.
13. Do not attempt to service sealed components with the exception of standard battery replacements.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS