13
ASSEMBLY INSTRUCTIONS (FINAL INSTALLATION STEPS)
NOTE: COMPLETE EITHER “PLUG-IN MOUNTING” OR “DIRECT WIRE MOUNTING” ASSEMBLY
INSTRUCTIONS BEFORE FOLLOWING THESE FINAL INSTALLATION STEPS.
2c. While holding glass (D) in place loosely over socket (C), tilt glass (D) to one side until one side of
spring bracket (L) passes through bottom hole in glass (D). With one side of spring bracket (L) in
bottom hole of glass (D) and against edge of hole, gently push opposite side of spring bracket
(L) inward and tilt opposite side of glass (D) downward to fully pass glass (D) over spring bracket
(L) and firmly seat glass (D) over socket (C).
2c
3c. While holding glass (D) in place, and with glass
(D) firmly seated over spring bracket (L),
carefully slip candle sleeve (H) down over
socket (C) inside of glass (D). Candle sleeve (H)
should be oriented such that it passes
between the flanges of spring bracket (L)
attached to socket (C) and it should be pushed
down completely until it rests against the
inside of glass (D) to secure glass (D) in place.
3c
14
H
D
12
3
1
2
C
C
C
L
L
L
D
D
D
C
L
