4
5
6
ASSEMBLY INSTRUCTIONS (PLUG-IN MOUNTING)
1a
1a. Remove ground screw from mounting bracket
(B), and discard.
Find a suitable location on the wall to mount
your fixture (location should be within 6 feet of
an electrical outlet).
Using the mounting bracket (B) as a template,
place flat side of mounting bracket (B) flush
against wall with the mounting hardware slots
aligned vertically in the 12 and 6 o’clock position
as shown. Mark locations for the two (2)
mounting hardware holes, one in each
mounting hardware slot. Set mounting bracket
(B) aside.
If
NOT mounting fixture on a stud,
Go to Step 2a on Pg. 6
If mounting fixture on a stud,
Go to Step 4a on Pg. 7
REMOVE AND
DISCARD
MOUNTING
HARDWARE
SLOT
For Plug-In Mounting Assembly,
Go to Step 1a on Pg. 5
For Direct Wire Mounting Assembly,
Go to Step 1b on Pg. 8
NOTE: This model can be installed as a fixture that
plugs into a wall outlet, or a fixture that is directly wired
to a wall-mounted outlet box.
B
x
x
