Kichler Lighting 300318, Инструкция по эксплуатации

Страница: 8 / 60

8 | KICHLER.COM
HANGING THE MOTOR ASSEMBLY
Step 3. Step 3. Remove the hairpin and clevis pin from the downrod assembly, retain
for later use.(Fig.8)
Step 4. Step 4. Loosen the two set screws on the motor coupling.(Fig. 9)
Step 5. Step 5. Place the coupling cover, canopy hole cover and canopy over the
coupling found on the top of the motor assembly. Carefully feed fan wires
from the motor assembly through the downrod, then insert the downrod into
the coupling.(Fig.10)
Fig. 10
Set Screw
Downrod
Canopy
Canopy Hole Cover
Coupling Cover
Coupling
Clevis Pin
Hair pin
Fig. 9
Fig. 8