Kia Opirus 2006, Руководство пользователя, Страница: 68 / 317

Knowing your vehicle
58 3
On each side of the rear seat,
between the cushion and backrest,
are located a pair of ISOFIX anchor-
age points together with a top tether
mounting on the shelf behind the
rear seats. During the installation,
the seat has to be engaged at the
anchorage-points in a way you can
hear it clicking (check by pulling!)
and has to be fixed with the Top
Tether-belt on the belonging point on
the shelf behind rear seats. The
installing and the use of a child-seat
has to be done according to the
installing-manual, which is added to
the ISOFIX-seat. To secure the child restraint seat
1. To engage the child restraint seat
to the ISOFIX anchor, insert the
child restraint seat latch into the
ISOFIX anchor. Listen for the audi-
ble “click” sound.
2. Connect the tether strap hook to
the child restraint hook holder and
tighten to secure the seat. Refer to
“Securing a child restraint seat
with the “Tether Anchorage” sys-
tem” on page 3-62.
SBGQ03102 2GHA2127
WARNING
When using the vehicle’s
“ISOFIX” system to install a
child restraint system in the rear
seat, all unused vehicle rear seat
belt metal latch plates or tabs
must be latched securely in their
seat belt buckles and the seat
belt webbing must be retracted
behind the child restraint to pre-
vent the child from reaching and
taking hold of unretracted seat
belts.
Unlatched metal latch
plates or tabs may allow the
child to reach the unretracted
seat belts which may result in
strangulation and a serious
injury or death to the child in the
child restraint.