Kia Opirus 2006, Руководство пользователя, Страница: 124 / 317

Knowing your vehicle
114 3
• Scan: Push [SCAN] button once to
increase from next higher station to
automatically search for available
station. It stays for 6 seconds on
every available station and the
band blinks for 6 seconds and
increases again. Push [SCAN] but-
ton again to cancel the search. (It
is either BSM or SCAN according
to area)
6. Pre-set button
Press one of 6 buttons (1~6) briefly
for less than 1.5 seconds to listen to
the station memorized to each but-
ton. If you are listening to the station
you found with TUNE or SEEK func-
tion other than the station memo-
rized to the preset button indicated
on LCD and want to memorize the
current station to the corresponding
preset button, press and hold the
button for more than 1.5 seconds
then the channel will be memorized
to the button with a beep.
7. LCD display screen
It indicates FM1/FM2/AM along with
current band, pre-set channel, FM
stereo with "ST", and CLASSIC/
JAZZ/ROCK according to EQ set-
ting.
8. EQ mode selection button
(Equalizer)
This audio system lets you choose
the equalizer setting to your taste for
each genre of music with the one-
touch [EQ] button. Each time you
press this button the sound equalizer
setting will switch from CLASSIC
➟
JAZZ
➟
ROCK
➟
DEFEAT (not dis-
played)
➟
CLASSIC
9. Audio mode selection but-
ton
Push this button to select audio
mode.
It changes in BAS
➟
MID
➟
TRE
➟
FAD
➟
BAL
➟
Current mode
➟
BAS ·····
order. After selecting mode to
change and use volume control but-
ton to change value. The value will
be indicated on LCD screen.
• On Bass sound (BAS) mode,
rotate the volume button clockwise
to increase Bass sound and anti-
clockwise to decrease Bass sound.
• On mid sound (MID) mode, rotate
the volume button clockwise to
increase mid sound and anti-clock-
wise to decrease Mid sound.
• On high sound (TRE) mode, rotate
the volume button clockwise to
increase high sound and anti-
clockwise to decrease high sound.
• On front and back sound control
(FAD) mode, rotate the volume but-
ton clockwise to enable back
speakers and anti-clockwise to
enable front speakers.
• On left and right sound control
(BAL) mode, rotate the volume but-
ton clockwise to enable right
speakers and anti-clockwise to
enable left speakers. 5 seconds
after adjusting, display screen
goes back to previous display.