manualshive.com logo in svg

Kia NiroEV 2019, Руководство пользователя, Страница: 558 / 623

Поделиться
Скачать
Kia NiroEV 2019 Скачать руководство пользователя страница 558

7 45

Maintenance

Fuse switch

Always set the fuse switch to the ON
position before using the vehicle.
If you move the switch to the OFF
position, some items such as audio
and digital clock must be reset and
transmitter (or smart key) may not
work properly. When the switch is
Off, the caution indicator will be dis-
played on the instrument cluster.

Motor compartment fuse
replacement

1. Turn the ignition switch and all

other switches off.

2. Remove the fuse panel cover by

pressing the tab and pulling the
cover up.

ODEEV078074R

ODEEV078075R

CAUTION

• Put all switches in ON when

driving.

• If the vehicle remains idle for

over 1 month, put all switches
in OFF to prevent the batteries
from being discharged.

• Excluding long-term parking

for over 1 month, the contact
points of switches may wear
out upon extensive use.
Please refrain from excessive
use of switches.

Содержание NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов