manualshive.com logo in svg

Kia NiroEV 2019, Руководство пользователя, Страница: 307 / 623

Поделиться
Скачать
Kia NiroEV 2019 Скачать руководство пользователя страница 307

4 149

Features of your vehicle

To use the cup holder space as a
storage compartment, turn the half
part of the cup holder (2) to the direc-
tion of the arrow.

Cups or small beverage cans may be
placed in the cup holders.

Sunvisor

Use the sunvisor to shield direct light
through the front or side windows.
To use the sunvisor, pull it down-
ward.
To use the sunvisor for the side win-
dow, pull it downward, unsnap it from
the bracket (1) and swing it to the
side (2).
To use the vanity mirror, pull down the
visor and slide the mirror cover (3).
The ticket holder (4) is provided for
holding a tollgate ticket. (if equipped)

ODEEV048250

■

Rear seat

ODE046420R

ODE046444

Содержание NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов