Kia NiroEV 2019, Руководство пользователя

Страница: 315 / 623

4 157
Features of your vehicle
Wireless smart phone charging
1. Remove any object on the smart
phone charging pad including the
smart key. If there is any foreign
object on the pad other than a
smart phone, the wireless charging
function may not operate properly.
2. Place the smart phone on the cen-
tre of the wireless charging pad.
3. The indicator light will change to
orange once the wireless charging
begins. After the charging is com-
plete, the orange light will change
to green.
4. You can choose to turn the wireless
charging function to either ON or
OFF by selecting the USM on the
instrument cluster. (Please refer to
“Instrument Cluster” for details).
If the wireless charging does not
work, gently move your smart phone
around the pad until the charging indi-
cator light turns orange. Depending
on the smart phone, the charging indi-
cator light may not turn green even
after the charging is complete.
If the wireless charging is not func-
tioning properly, the orange light will
blink and flash for ten seconds then
turn off. In such cases, remove the
smart phone from the pad and
replace it on the pad again, or double
check the charging status.
If you leave the smart phone on the
charging pad when the vehicle igni-
tion is in OFF, the vehicle will alert
you through warning messages and
sound (applicable for vehicles with
voice guidance (function) after the
‘Good bye’ function on the instru-
ment cluster ends.
CAUTION
• When the interior temperature
of the wireless charging sys-
tem rises above a set temper-
ature, the wireless charging
will cease to function. After
the interior temperature drops
below the threshold, the wire-
less charging function will
resume.
• If any metallic object such as
coins is located between the
wireless charging system and
the smart phone, the charging
may be disrupted. Also, the
metallic object may heat up.
• If there is any metallic object
between the smart phone and
the wireless charging pad,
immediately remove the smart
phone. Remove the metallic
object after it has completely
cooled down.
• The wireless charging may
not function properly when
there is a heavy accessory
cover on the smart phone.
(Continued)