Kia NiroEV 2019 Скачать руководство пользователя страница 217

Страница: 217 / 623

4 59

Features of your vehicle

Items

Explanation

Auto Lock

• Disable : The auto door unlock operation will be cancelled.

• Enable on speed: All doors will be automatically locked when the vehicle speed exceeds 15 km/h

(9.3 mph).

• Enable on shift: All doors will be automatically locked if the vehicle is shifted from the P (Park)

position to the R (Reverse), N (Neutral), or D (Drive) position.

Auto Unlock

• Disable : The auto door unlock operation will be cancelled.

• Vehicle off : All doors will be automatically unlocked when the POWER button is set to the OFF

position.

• On shift to P : All doors will be automatically unlocked if the gear is shifted to the P (Park) posi-

tion.

2. Door

❈

The information provided may differ depending on which functions are applicable to your vehicle.

Содержание NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NiroEV 2019

Отзывы:

Kia NiroEV 2019, Руководство пользователя, Страница: 217 / 623

Результаты поиска

Содержание NiroEV 2019

Отзывы: