Genuine Accessories
Wires may be solid color, or striped (tracer). The first color in the description
When disconnecting the wires, grasp the connectors, not the wires.
indicates the base color of the wire; the second indicates the stripe.
Example:
Example:
Solid color wire
Striped Wire
Correct
Incorrect
Connector diagrams show the harness side view, unless noted. The wire pin
When locking connectors, listen for an audible "click" indicating the connectors
numbers are shown from the wire harness side, not the connector side.
are securely locked.
Example:
1. Place the T-tap on the vehicle wire
2. Using pliers, close and crimp T-tap around the vehicle wire.
** Extreme care must be taken to ensure the male spade is inserted into the T-tap properly
3. Insert accessory harness wire with male spade terminal into the opening in T-tap.
Special Instructions
Electrical Connection Procedure
Wire Appearance
Disconnecting Connectors
Connector Diagrams
Connecting Connectors
T-Tap Install Procedure
*550-0670-000*
550-0670-000 Rev. 004
Revision Date
11/23/2015
Page 3 of 17
