Kia D9062 ADU00, Руководство пользователя

Страница: 13 / 17

Genuine Accessories
37 38
Function Check Function Check
N
O
T
E
1. Cover the forward-facing photocell with a dark cloth or towel.
2. Turn the ignition to "ON".
3. Verify that the green LED (light left of center) is on. If not, press and
hold the power button to turn the green LED on.
4. With the dark cloth in place, and the power on, the mirror will darken.
5. Remove the dark cloth, and the mirror will return to normal.
N
O
T
E
1. Verify that a direction or calibrate (such as "NE" or "C") is displayed
in the display window. If not, ensure the compass feature is
turned on by pressing the compass button.
39 40
Function Check
N
O
T
E
1. Turn the ignition to "OFF"
2. Ensure the compass display is no longer visible, and the green LED is no
longer on.
3. Press each HomeLink button, one-at-a-time, and verify that the LED
indicator to the right of the center button illuminates with a red LED when
buttons are pressed.
N
O
T
E
1. Ensuring a new tether clip has been inserted into the A-pillar trim panel
and begin re-install of the A-pillar trim panel.
2. Insert the A-pillar lower surface into the mating surface on the top of the
dash panel.
3. Move the panel closer to the A-pillar, aligning the clips with their
corresponding holes. Carefully snap the panel into place.
WARNING: Always use a new tether clip when re-installing the
A-pillar trim panel. Failure to use a new clip may result in serious injury or
death in the event the airbag deploys.
Do not damage the A-pillar trim panel or tether clips.
Compass
*550-0670-000*
550-0670-000 Rev. 004
Revision Date
11/23/2015
Page 13 of 17