2. Press the brake pedal to disengage the remote starter unit. With the vehicle key is in the IGNITION ON position, press the brake pedal or wait 30 seconds for the vehicle to
turn to ready status to drive.
Note: In remote engine start status, engine will be deactivated according to following conditions.
- Open the door and 30 seconds is passed.
- Press brake pedal without key is in IGNITION ON position.
Engine Run Time
Your Remote Car Starter can be programmed to run the engine for 10 or 5 minutes (10 minutes by default).
Note : Run time is set by installer.
To check the amount of runtime remaining (2-way only):
After pressing
button once, if you press
button 2 times within 3 seconds, remote starter will be operated. Once remote starter is succeeded and the
engine is turned on, the remote will receive signal and shows the remaining remote starter time as a START LED icon.
Remote Starter Features
Remote Start Error Diagnostic
If remote engine starter fails, the vehicle will not be started and the horn will sound accordingly to the table below.
Number of Horn times
Remote Start Error
1
Hood open
2
KEY IN or IG1 ON
3
Valet mode
4
Brake press
5
Trunk open
6
Door open
