Remote-Starting your Vehicle
Remote-Starting
For the 2-way remote:
1. Press the
button one time. The remote will beep once and display the Lock icon. Then, press the
button within 2 seconds. The remote will beep once and
display the KEY icon.
2. 5 seconds later, the remote will activate starter. The Key icon will be shown with 3 different tones of beeping then the LED Icon will be scrolled..
For the 1-way remote:
1. Press
button one time and Lock LED will be displayed. Then press
button for 2 seconds within 3 seconds.
2. Remote Stop - Press button for 2 seconds.
If your vehicle does not start at the first attempt, the system will shut down, wait a few seconds and try to start the engine again. There will be 3 start attempts before the
system gives up.
Note: Please make sure press to button only after LED lighting ends to activate each feature properly.
Driving Off (Steps from Remote Start to Driving)
With the vehicle running remotely, press
button 2 times to disarm the OEM Starter Kill and/or the OEM alarm and unlock the doors. Enter the vehicle and do the
following:
1. Turn the ignition key to the IGNITION ON (RUN) position.
(Do not turn the key to the CRANK position while the engine is running. This would cause the starter motor to reengage. Disarm the remote starter mode by pressing the foot
brake)
